custom 6
2 posters
Page 1 of 1
custom 6
Hey all!! I am trying to gather some information on my recently acquired custom 6. It starts, and runs (once it gets started) it almost feels like it needs a primer button any tips? I am also curious about the mower deck, it's an alumanium deck, wondering what fluid/grease goes in the gear boxes? I lubed all the fittings, I want to work out all the bugs and then break it down and refurbish it. Any tips? Thanks...Edward
efk1970- Guest
Re: custom 6
The first thing I would do with it is perform a total cleaning of the fuel system. Start at the gas tank, inspect for crud and floating debris. Clean if necessary. Replace the fuel line between the tank and carb. Put a fuel filter inline. Clean the carb with carb cleaner. Check to see if there is a rebuild kit available still. If not, get the Tecumseh part number and put it in an ebay search. You may be surprised. I have been many times. Good luck!
spence- Admin
- Number of posts : 168
Registration date : 2008-05-15
Re: custom 6
You might want to check and see if when the throttle is pushed up to choke that the choke is actually closing,if not its adjustable, I have a carb fron a 7HP that has a seperate choke like whats on the custom 7s on up that I will be putting on my custom 6 since I like the seperate choke alot better. Jeff
66custom6- Number of posts : 25
Age : 63
Registration date : 2008-10-19
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|