1978 gt briggs repower
2 posters
Page 1 of 1
1978 gt briggs repower
<span id="sceditor-start-marker" style="line-height: 0; display: none; " class="sceditor-selection sceditor-ignore"></span><span id="sceditor-end-marker" style="line-height: 0; display: none; " class="sceditor-selection sceditor-ignore"></span>recently i bought a 78 gt 18 with no engine,the onan was removed before i got it. i have a 18 hp twin from a 80,s gt18 i plan on using. now it seems the original drive pulley and the ones i see on fleabay are 1 1/8 inch id however the briggs has a 1 inch crank. anyone have any ideas for how to solve this would be greatly appreciated
mudpatrol1- Number of posts : 10
Registration date : 2014-10-05
RE:BRIGGS REPOWER
HI
YOU WILL BE HAPPY WITH THE OLE BRIGGS TWIN, THERE IS PLENTY OF I" ID. SUBURBAN ENGINE PULLYS AROUND, IF NOT YOU CAN SLEVE A 1 1/8" PULLY, BE SURE TO GET THE ENGINE BELT GUIDES SO THE CLUTCH BELT WILL WORK PROPERLY.
HAVE A GOOD ONE
JIMMY
YOU WILL BE HAPPY WITH THE OLE BRIGGS TWIN, THERE IS PLENTY OF I" ID. SUBURBAN ENGINE PULLYS AROUND, IF NOT YOU CAN SLEVE A 1 1/8" PULLY, BE SURE TO GET THE ENGINE BELT GUIDES SO THE CLUTCH BELT WILL WORK PROPERLY.
HAVE A GOOD ONE
JIMMY
Georgia SS- Number of posts : 222
Registration date : 2011-09-15
Re: 1978 gt briggs repower
thanks jimmy,i actually have the original onan pulley and found a sleeve kit on ebay. so far all the crank pulleys i found are 1 1/8 inches though. as of right now i have 3 18 horse twins,so i know how good they are.Roger
mudpatrol1- Number of posts : 10
Registration date : 2014-10-05
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|