SUBURBAN REAR WHEEL HUBS
3 posters
Page 1 of 1
SUBURBAN REAR WHEEL HUBS
OVER IN THE CLASSIFIED ADD SECTION SOME ONE IS ASKING ABOUT A REAR WHEEL HUB WITH 3 LUG BOLTS, IS NOT THE NEWER MODEL KEYED AXEL HUB WITH 5 LUG BOLTS COMPATIBLE. SAW A GUY AT A MOWER PULL BREAK A WHEEL OFF WHEN LOOKING SAW IT WAS 3 LUGS. WET IN GEORGIA
Georgia SS- Number of posts : 222
Registration date : 2011-09-15
hub removal
A lilttle off the subject but has anyone got anytips on removing the hubs, i have removed the set screws and a ton of pb blaster and they still wont come off, i have already broke one i dont want to brake the other. i cant take the transaxle apart with them them on
its on a ss16
![Mad](https://2img.net/i/fa/i/smiles/icon_mad.gif)
ss12- Number of posts : 72
Age : 33
Registration date : 2015-01-09
Re: SUBURBAN REAR WHEEL HUBS
12 , you may try autozone , you can rent tools for free there ( returned undamaged of course ) , see if they have a large three arm puller big enough. if not may try another tool rental or if you know someone at an auto shop that might help you . > tim
TKW- Number of posts : 108
Registration date : 2011-10-13
Hub removal
I got the largest pulled I could find at advance auto. I wrenched as hard as I could until the hub broke lol. I'm out of ideas. Except to May be try a torch
ss12- Number of posts : 72
Age : 33
Registration date : 2015-01-09
RE: SUBURBAN REAR WHEEL HUBS
HI
IF YOU HAVE A SS16 IT SHOULD BE 1974 OR NEWER WITH SPLINED HUBS. OK I WAS IN THE SAME BOAT A WHILE BACK NEEDED TO REPLACE 2 AXEL SEALS, HUBS STUCK GOOD, HAVE AN OLD CHRYSLER REAR HUB PULLER IN MY SHOP, PULLED THE FLANGES OFF THE HUBS, GOT OUT THE 4 1/2" ANGLE GRINDER, 7 DISC LATER I HAD THE HUBS SPLIT AND OFF. O I HAD AN EXTRA SETOF HUBS OR I WOULD HAVE BEEN IN TROUBLE.
GOOD LUCK
JIMMY
IF YOU HAVE A SS16 IT SHOULD BE 1974 OR NEWER WITH SPLINED HUBS. OK I WAS IN THE SAME BOAT A WHILE BACK NEEDED TO REPLACE 2 AXEL SEALS, HUBS STUCK GOOD, HAVE AN OLD CHRYSLER REAR HUB PULLER IN MY SHOP, PULLED THE FLANGES OFF THE HUBS, GOT OUT THE 4 1/2" ANGLE GRINDER, 7 DISC LATER I HAD THE HUBS SPLIT AND OFF. O I HAD AN EXTRA SETOF HUBS OR I WOULD HAVE BEEN IN TROUBLE.
GOOD LUCK
JIMMY
Georgia SS- Number of posts : 222
Registration date : 2011-09-15
hub removal
i dont have a extra set of hubs,lol but i have already broke one so i guess what do i have to lose.
ss12- Number of posts : 72
Age : 33
Registration date : 2015-01-09
Re: SUBURBAN REAR WHEEL HUBS
sorry to hear the puller suggestion didn't work out . a great selling point for the need of anti-seize from factory assembly . pm sent . > tim
TKW- Number of posts : 108
Registration date : 2011-10-13
Re: SUBURBAN REAR WHEEL HUBS
I'm just going to cut them off lol
ss12- Number of posts : 72
Age : 33
Registration date : 2015-01-09
![-](https://2img.net/i/empty.gif)
» 73-74 st16 parts
» St16 parts
» Trade Sears Suburban SS16 For Sears Suburban SS12
» Rear wheel covers/Hubcaps
» dual wheel suburban
» St16 parts
» Trade Sears Suburban SS16 For Sears Suburban SS12
» Rear wheel covers/Hubcaps
» dual wheel suburban
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|