Cross Reference Numbers for Transaxle Oil Seals

I have looked all the way back thru the 2010 posts. It seems nobody has posted cross reference numbers for the various oil seals for the SS12.

Sears Manual Number
6269H High/Low Shaft
6270H Drive/Pulley Shaft
6271H Brake Drum Shaft
4910H Axle Shaft

Big Thanks
dave

INPUT PULLY--TIMKIN 471456
BRAKE DRUM--TIMKIN 470954
HI/LO SHIFT---FM 6269H NON EXIST
KEY AXEL--TIMKIN 472311
SPLINED AXEL--TIMKEN 471224

After much googling, and looking thru various tractor sites I have came up with the following NAPA oil seal numbers.

I have replaced all 5 seals on my 1968 Super 12. No leaks so far.

Napa has two sets of numbers on the box. I have listed each NAPA number.

High/Low Shaft 4911 27SS4907
Drive/Pulley Shaft 6904 27SS2144
Brake Drum Shaft 7443 27SS2157
Keyed Axle Shaft 9838 27SS2210

Hopefully this helps somebody.
dave

HI
I WOULD LIKE YOU TO VERIFY THE NAPA 4911 SEAL SIZES ID.OD & WIDTH, THE 4911 SEAL SEAMS TO FIT A GM TURBO 350 TRANSMISSION SHIFT SHAFT, I AM LOOKING FOR A COUPLE OF THE SHIFT SHAFT SEALS.
THANKS
JIMMY

I am not at home. I don't know how I came up with each napa number, as I used multiple ways.
I did install all napa oil seals as listed, and have not had any leaks.
From the napa website, for the 4911.
ID .5
OD .691
Width .094
dave

OK THOSE SIZES FOR THE 4911 SEAL SOUND RIGHT, I WILL KEEP WORKING WITH NAPA TO HOPEFULLY FIND SOME.
THANKS
JIMMY